OIP condenser transformer/reactor bushing is mainly used for power transformer/reactor as current carrier for leading in and out current of high voltage side, middle voltage side and low voltage side of transformer as well as insulate the oil tanks of power transform//reactor.
40.5kV - 2000kV OlP condenser transformer/reactor bushing
40.5kV - 800kV OlP condenser transformer/reactor bushingwith composite envelope
40.5kV - 252kV oil-oil OlP condenser transformer bushing
126kV - 550kV oil-SF6 OlP condenser transformer bushing
24kV - 40.5kV heavy current OlP transformer bushing
72.5kV - 800kv OlP condenser wall bushing
Contact us and get support with more product information.
Types of capacitive bushing
OIP Condenser bushing is the current carrying and insulating equipment component, of which high-tension line through the wall, facility shell, connection between facility in the power system. According the application which is classified as below:
Oil to Air Bushing
lt's for oil insulated type power transformer.
Oil to Oil Bushing
lt's for the connection between the power transformer and cable-junction boxesand other oil-filled devices .
Oil to SF6 (Gas) Bushing
lt's for the direct connection of power transformer to gas-insulatedswitchgear(GIS) and can be mounted at any angle.
High-Current Bushing
From 5000A to 35,000A. Normally for connecting the oi-filled power transformerto a generator bus.
Wall Bushing
lt's for through the wall and other types through such as the roof.
GIS Bushing
it's for gas-insulated and air-insulated switchgear.
Audited Supplier 
){kind=link}
){kind=link}